EZ1+ Bridge / Router
Overview:
The EZ1+ line of products are 100mw (up to 250mw) 802.11b/g Indoor Commercial grade products.
The EZ1+ supports data rates up to 54Mbps and helps to construct your high-speed home or office wireless network.
This access point equips one LAN port and one rubber duck antenna via RP-SMA connector.
Supporting DHCP server and client, the EZ1+ is easy to install and setup.
The wireless security mechanism is provided over 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 and AES.
The EZ1+ is backwards compatible with IEEE 802.11b wireless devices.
Key Features :
| IEEE 802.11b/g | Operational Modes |
| 802.11b/g 54Mbps Device | Bridge |
| 64/128 bit WEP | Router |
| Enabling/disabling SSID broadcasts | Functionality Modes |
| MAC-address-based access control | Access Point |
| IEEE 802.1x | Access Point Client |
| EAP, PEAP, WPA, WPA2 | WDS (Wireless Distribution System) |
| WDS for 6 wireless bridge link | WDS + Access Point |
| Antenna Alignment Utility | Universal Repeater |
| Transmit power control | DHCP Server |
| Wireless client isolation | Static DHCP mappings |
| Wireless client status monitoring | Current DHCP mappings Listing |
| Management | Firmware Upgrade |
| Web Interface | Web Interface |
| Discovery Tool | Discovery Tool |
| SNMP | Power Over Ethernet |
| SSH | 18v Power Supply |
| Telnet | Passive PoE Injector |
| Configuration | Watchdog timer |
| Configuration backup / restore | Hardware |
| Configuration reset | Software |
| System | ||
| Processor | Realtek 8186, 200MHz MIPS | |
| Memory | 2MB FLASH, 8MB SDRAM | |