| |
EZ1+ Bridge / Router
Overview:
The EZ1+ line of products are 100mw (up to 250mw) 802.11b/g Indoor Commercial grade products.
The EZ1+ supports data rates up to 54Mbps and helps to construct your high-speed home or office wireless network.
This access point equips one LAN port and one rubber duck antenna via RP-SMA connector.
Supporting DHCP server and client, the EZ1+ is easy to install and setup.
The wireless security mechanism is provided over 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 and AES.
The EZ1+ is backwards compatible with IEEE 802.11b wireless devices.
Key Features :
| IEEE 802.11b/g |
Operational Modes |
| 802.11b/g 54Mbps Device |
Bridge |
| 64/128 bit WEP |
Router |
| Enabling/disabling SSID broadcasts |
Functionality Modes |
| MAC-address-based access control |
Access Point |
| IEEE 802.1x |
Access Point Client |
| EAP, PEAP, WPA, WPA2 |
WDS (Wireless Distribution System) |
| WDS for 6 wireless bridge link |
WDS + Access Point |
| Antenna Alignment Utility |
Universal Repeater |
| Transmit power control |
DHCP Server |
| Wireless client isolation |
Static DHCP mappings |
| Wireless client status monitoring |
Current DHCP mappings Listing |
| Management |
Firmware Upgrade |
| Web Interface |
Web Interface |
| Discovery Tool |
Discovery Tool |
| SNMP |
Power Over Ethernet |
| SSH |
18v Power Supply |
| Telnet |
Passive PoE Injector |
| Configuration |
Watchdog timer |
| Configuration backup / restore |
Hardware |
| Configuration reset |
Software |
| System |
|
| Processor |
Realtek 8186, 200MHz MIPS |
| Memory |
2MB FLASH, 8MB SDRAM |
|
|
EZ1+
Additional Information
Datasheet EZ1+ IN
Quick Installation Guide
User Guide
Firmware
Part Number
EZ1IN |
|
