EZ2+ Bridge / Router
The EZ2+ line of products are High Power (250mw) 802.11b/g Outdoor Commercial grade products designed for the WISP market.
They are available with an integrated 15dBi panel antenna and in aluminum die cast enclosure with N-type Female connector for use with high gain external (detached) antennas.
The EZ2+ wireless Access Point, based on IEEE 802.11b/g technology, delivers access point features enabling cost effective access for mobile and fixed wireless users.
In addition, the EZ2+ Series supports IEEE 802.1x compliant and RADIUS, the most up-to-date wireless security solution for applications in public places.
Moreover, the EZ2+ Series provides standard and advanced WDS (Wireless Distribution System) bridge functionality joining LAN segments that may be geographically separated to a complete network. Up to 6 WDS bridge links work in AP function simultaneously, enabling LAN segments to be flexibly connected to mirror any network topology which a traditional wired network can achieve.
The included Antenna Alignment Utility provides the at-a-glance way to easily align the antennas through the friendly web based user interface!
The default PoE capability allows supplying power over the Ethernet cable to remotely power the electronics.
With the sleek and intuitive Web-based user interface, the EZ2+ can be easily managed through local Ethernet connection or remote wireless connection.
Multiple Embedded Graphs make troubleshooting simple. The over all RSSI, Traffic, and Packet/Byte graphs provide all the necessary device history information over a period of 24 hours.
Key Features :
| IEEE 802.11b/g | Operational Modes |
| 802.11b/g 54Mbps Device | Bridge |
| 64/128 bit WEP | Router |
| Enabling/disabling SSID broadcasts | Functionality Modes |
| MAC-address-based access control | Access Point |
| IEEE 802.1x | Access Point Client |
| EAP, PEAP, WPA, WPA2 | Wireless Distribution System (WDS) |
| WDS (up to 6 wireless bridges) | WDS + Access Point |
| Antenna Alignment Utility | Universal Repeater |
| Transmit power control | DHCP Server |
| Wireless client isolation | Static DHCP mappings |
| Wireless client status monitoring | Current DHCP mappings Listing |
| Management | Firmware Upgrade |
| Web Interface | Web Interface |
| Discovery Tool | Discovery Tool |
| SNMP | Power Over Ethernet |
| SSH | Power Supply up to 18v |
| Telnet | Passive PoE |
| Configuration | Watchdog timer |
| Configuration backup / restore | Hardware |
| Configuration reset | Software |
| System | ||
| Processor | Realtek 8186, 200MHz MIPS | |
| Memory | 2MB FLASH, 16MB SDRAM | |
| Radio | RTL8225 | |
| Power Amplifier | SE2527 | |