EZ-Go™
The EZ-Go™ is a high power outdoor 250mW wireless Client Bridge / Router system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 15 Mb/sec.
It complies with the 802.11b and g standards to insure interoperability.
The EZ-Go™ is housed in a UV resistant and UL rated weatherproof enclosure with a nice aesthetic appearance and clean lines. It includes an integrated 13dBi high efficiency antenna for extended range.
With its advanced software, the EZ-Go™ supports multiple operating modes, including; Client Bridge, Client Router, Access Point Router, Access Point + WDS and Point to Point.
The EZ-Go™ comes complete with Cat5e rated POE (Power Over Ethernet) power inserter and 18VDC auto-ranging power supply.
The corrosion resistant bracket system accommodates pole or wall mounting.
The unit supports an optional external antenna connector.
Key Features :
| IEEE 802.11b/g | Operational Modes |
| 802.11b/g 54Mbps Device | Bridge |
| 64/128 bit WEP | Router |
| Enabling/disabling SSID broadcasts | Functionality Modes |
| MAC-address-based access control | Access Point |
| IEEE 802.1x | Access Point Client |
| EAP, PEAP, WPA, WPA2 | Wireless Distribution System (WDS) |
| WDS (up to 6 wireless bridges) | WDS + Access Point |
| Antenna Alignment Utility | Universal Repeater |
| Transmit power control | DHCP Server |
| Wireless client isolation | Static DHCP mappings |
| Wireless client status monitoring | Current DHCP mappings Listing |
| Management | Firmware Upgrade |
| Web Interface | Web Interface |
| Discovery Tool | Discovery Tool |
| SNMP | Power Over Ethernet |
| SSH | Power Supply up to 18v |
| Telnet | Passive PoE |
| Configuration | Watchdog timer |
| Configuration backup / restore | Hardware |
| Configuration reset | Software |
| System | ||
| Processor | Realtek 8186, 200MHz MIPS | |
| Memory | 2MB FLASH, 16MB SDRAM | |
| Radio | RTL8225 | |
| Power Amplifier | SE2527 | |