The EZ-Go^®-2 is a high power outdoor 250mW wireless Client Bridge / Router system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 15 Mb/sec.

It complies with the 802.11b and g standards to insure interoperability.

The EZ-Go^®-2 is housed in a UV resistant and UL rated weatherproof enclosure with a nice aesthetic appearance and clean lines. It includes an integrated 14dBi high efficiency antenna for extended range.

With its advanced software, the EZ-Go^®-2 supports multiple operating modes, including; Client Bridge, Client Router, Access Point Router, Access Point + WDS and Point to Point.

The EZ-Go^®-2 comes complete with Cat5e rated POE (Power Over Ethernet) power inserter and 18VDC auto-ranging power supply.

The corrosion resistant bracket system accommodates pole or wall mounting.

The unit supports an optional external antenna connector.

Key Features :

IEEE 802.11b/g	Operational Modes
802.11b/g 54Mbps Device	Bridge
64/128 bit WEP	Router
Disable SSID broadcasts	Functionality Modes
MAC based access control	Access Point
IEEE 802.1x	Access Point Client
EAP, PEAP, WPA, WPA2	Wireless Distribution System
WDS (up to 6 bridges)	WDS + Access Point
Antenna Alignment Utility	Universal Repeater
Transmit power control	DHCP Server
Wireless client isolation	Static DHCP mappings
Wireless client status	DHCP mappings Listing
Management	Firmware Upgrade
Web Interface	Web Interface
Discovery Tool	Discovery Tool
SNMP	Power Over Ethernet
SSH	Power Supply up to 18v
Telnet	Passive PoE
Configuration	Watchdog timer
Backup / Restore	Hardware
Configuration reset	Software